Generally speaking, most pool owners already know about the basics of pool maintenance. They know how to clean their pool and keep it free from algae, dirt, and other debris, but they tend to be absolutely clueless when it comes to issues like chlorine levels, salinity and alkalinity, acidity ranges, pool clarification, and a lot of others. With a little help from pool maintenance for beginners, even the most obscure of pool care will be easy to understand.
Below are the steps you need to follow.
Checking the pool for any damages is a good way to start. Any tiles with cracks, missing pieces, or loose tiles don’t only look bad in a pool, but they can be very dangerous too. Immediate repairs or replacements are in order. When replacing tiles or repairing them, pool maintenance for beginners reminds the reader to drain the pool and allow the grout to dry for at least one day before filling the pool up again. Be sure to match the tiles as you go. In the event that you have some left-over tiles from when you were still constructing the pool, use that to replace the broken ones and save money!
Never allow algae or buildup to accumulate on the walls or sides and bottom of the pool. Algae, for those not-so-nerdy types, are simple microorganisms that look kind of like plants. Algae grow in bodies of water which are often exposed to sunlight. As suggested by pool maintenance for beginners, algae should never be allowed to grow in your pool or you’ll end up with a fishpond instead. Dirt and loose particles should also be kept away from the pool water to prevent clouding, contamination, and clogging. Aside from dirt, hair also clogs the pool’s drainage systems and filters, so removing hairballs should be part of maintenance protocol.
To ensure that none of the nasties from step two thrive in your pool water, add some chlorine. The method and type of chlorine used for your pool is up to you. A better choice would be automatic chlorinators, but they’re expensive. Chlorine helps prevent algae from forming, as well as sterilizes the water. As a rule of thumb, always regulate your use of chlorine since too much can irritate your skin and be harmful if you swallow some pool water accidentally.
Since we’re not all obsessive-compulsive, each pool should have a filter which will collect all of the gunk we forget to clean or just can’t help but leave be. Make it a habit to regularly check your filters and make sure that they don’t clog up and make your pool a swamp. Don’t forget that you’ll be swimming in it.
Pool maintenance for beginners also suggests that you super-chlorinate your pool on a regular basis, making sure that you do it a whole day prior to using the pool. Super-chlorinating your pool involves using a high amount of chlorine – higher than what you’d normally use, to effectively remove dirt and buildup as well as to fully sanitize your pool. A thorough weekly pool maintenance cleaning involving draining your pool and brushing it until it gleams is also advised. Remember that the makings of a great pool is a clean pool.
Pool maintenance for beginners strives to simplify the task of pool maintenance in the hopes of dispelling the myth of the impossible-to-clean-pool. It isn’t all that difficult to understand. Now you know.
Disclaimer: The videos, posts, and comments contained in our *Health & Weight Loss Categories* on this website are not medical advice or a treatment plan and are intended for general education and demonstration purposes only. They should not be used to self-diagnose or self-treat any health, medical, or physical condition. Don’t use this website to avoid going to your own healthcare professional or to replace the advice they give you. Consult with your healthcare professional before doing anything contained on this website.